|
|
| |
| GongyeRuanbang Product cist : |
|
| |
| Application Scope |
Our industrial hose pumps are used to transport the materials in following industries:
Phosphate fertilizer and compound fertilizer industry: thick pasty stock and sedimentary sludge
in spraying and granulating; quantitative transportation in labs.
Mining and mineral separation: filling materials in gold mining, the mining pulps in smelting gold,
pasty mined slurry, sewer drainage, sorbent, grout and mortar, etc.
Chemical: pulp of acid, alkali and phosphate; inorganic salt such as titanium dioxide (TiO2);
crystallized liquid, suspending fluid, emulsion, resin, ooze and any acid or alkali pasty materials.
Sewage treatment: silt slurry and lime mortar.
Oil industry: slurry in well drilling, crude oil.
Ceramics: ceramic slurry, glaze slurry and frit.
Papermaking: paper pulp, sulfur slurry.
Cosmetic: toothpaste, emulsion, shampoo, hair conditioner, face cream and face oil.
Construction: sewerage, drainage of deep tunnel, cement slurry, concrete slurry and ceiling painting.
Electric plating and electrolysis: electroplating solution, electrolyte, anode slime and deposit.
Food industry: oil and beverage.
Pharmacy: all kinds of pharmaceutical material and liquid.
Besides above materials, our industrial hose pump can also transport other liquids with high sealing
requirements, high viscosity and large quantity of solid particles contained, such as radioactive liquid
waste, electrolytic waste, liquid contained metal, oil paint, coating materials, auxiliary agent in printing
and dyeing, bond, glue, latexes and refractory fibre slurry, etc. |
|
| Pump Selection |
1. When pump works intermittently and without fixed quantity requirement, the rated flow rate of
selected pump can be larger than the actual needed flow rate.
2. When pump works continuously, the actual flow rate should be the same as the rated flow rate
of selected pump. If the flow rate needs to be regulated, the inverter speed regulation pump should be
selected.
3. Rated output pressure is the maximum allowable continue working pressure of pump driven by
an electric motor with determined power. So the actual working pressure may be smaller than the rated
output pressure. If the difference between these two pressure is too large, the use can choose motor
with different power.
4. Normal hose can work under temperature less than 100C. Considering the generated heat during
work, the medium temperature should be less than 80C unless the ventilation and cooling condition is
good. Under that condition, the medium temperature can be up to 100C. If the medium temperature is
higher than 100C, the special heat resistant hose should be used.
5. When pumping hygienic medium in food and pharmacy industry, the special hygienic hose should
be used and ordered specially.
6. The main ingredients are natural rubber and butylene rubber. Please consider the compatibility
between the hose and transported medium.
7. The input and output of pump are at the same direction and can be changed with each other.
Please decide and choose according to actual piping and site situation.
8. Connection of input and output has two methods for selection: flange and insertion fitting.
9. The input and output of dual hose pump are also single port design.
10. Pump can be designed and manufactured to fulfill customer's special requirements.
|
Previous page
Next page
|
